1300 601 514
Eye Eye Turnbuckle Swages Thimbles Swages Saddles SR

$4.29$5.89 Includes GST

Sale!
Eye Eye Turnbucklle Swage Thimble Saddle Kit
Eye Eye Turnbuckle Thimble Swage Saddle Short Run
2 Pack of Nickel Coaed Copper Swages
2 Pack of Saddle Eye Straps
Eye Eye Turnbuckles
2 Pack of Stainless Steel Wire Rope Thimbles

Eye Eye Turnbuckle Swages Thimbles Swages Saddles SR

$4.29$5.89 Includes GST

Clear
SKU: 22454 Categories: , , , ,

Eye Eye Turnbuckle Swages Thimbles Swages Saddles SR Kit includes fittings suitable for one run of Stainless Steel Wire rope, under 10 meters in length, as it features one tensioning point. There are enough fittings for a single wire run. The kit can be configured for different strengths (sizes) of wire, and sizes of fittings. It is configured for a short run between posts – no fasteners are included.

Eye Eye Turnbuckle Swages Thimbles Swages Saddles SR Kit

This Eye Eye Turnbuckle Swages Thimbles Swages Saddles SR Kit is configured to suit a single short run (SR – under 10M) of stainless steel wire rope. The short run configuration uses an Eye Eye Turnbuckles (at one end) to provide a single tensioning points. There are two Eye Straps (Saddles) that attach directly to end posts, secured with rivets. The strength of the fittings can be chosen (4mm / M4 = light duty; 5mm / M5 = recommended; 6mm / M6 = heavy duty) along with sizing for the applicable wire rope (2.0mm & 2.4mm = light duty; 3.2mm = recommended; 4.0mm = heavy duty.

Application

The Eye Eye Turnbuckle Swages Thimbles Saddles Rivets SR Kit has an eye eye turnbuckle at one end, attached to the wire using a thimble and a swage, which forms a terminal loop. The eye eye turnbuckle then attaches to a saddle, which in turn attaches to an end post.  The other end of the run has another terminal loop, formed by another swage and thimble, but has no turnbuckle.

Wire may be installed through the intermediate posts and ‘cut to length’.  Drill the intermediate posts out to at least 4mm prior to swaging in place. Before swaging, please expand all of the tensioners so that the maximum adjust-ability is available.

Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement, minus a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings once installed and adjusted properly.

This number represents the amount we would cut off in the factory to custom build wires with this kit for a given length. We recommend cutting, building, installing and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

Contents

  • 1 – Eye Eye Open Turnbuckle Stainless Steel 316 Marine Grade
  • 2 – Nickel Plated Copper Ferrules (swages / crimps) Marine Grade
  • 2 – Thimbles Stainless Steel 316 Marine Grade
  • 2 – Saddles (eye straps) Stainless Steel 316 Marine Grade

Characteristics

  • Balustrade Kit for 1 Runs/Wire
  • Post Connections  Variable (no fasteners included)
  • Recommended Run Length <10M (SR)
  • Swaging Method:  Mechanical
  • Wire Structure: 7×7, 7×19
  • Diameter of Wire: 2.0mm, 2.4mm; 3.2mm; 4.0mm
  • Section Orientation: Flat, Stairs, Angle
  • Wire Orientation in a Section: Horizontal, Vertical

Additional Information

Run Length

Under 10M (SR)

Connection Style

Manual Swaging

Wire Diameter

2.0mm, 2.4mm, 3.2mm, 4.0mm

Attachment Style

Saddle

Attachment Substrate

Concrete, Metal, TImber

Material

Stainless Steel

Grade

AISI G316 (Marine)

Tension Style

Turnbuckle – Eye/Eye Open

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)