Garage Door Cable Single
Garage Door Cable Single

: Garage Door Cable 3.2mm 2850mm 7X19 G2070 Galvanised Steel ##

$0.00 Inc GST

SKU: 67826 Category:

Description

Garage Door Cable 3.2mm 2850mm 7X19 G2070 Galvanised Steel

Materials per wire:

  1. 1 x 3.2mm Aluminium Round Swage Sleeve
  2. 1 x 3.0mm Oval Aluminium Swage Sleeve
  3. Blank of 3.2mm 7×19 G2070 Galvanised Steel Wire Rope

Construction:

  1. Cut Wire Blanks of 3.2mm 7×19 G2070 Galvanised Steel Wire Rope where T2T Target length is 2850mm
  2. The Soft Eye uses up 60mm to bottom of uncrimped Oval Sleeve (relaxed in ‘natural shape’) to the outside edge when creating Soft Eye and wire needs to extend past from the front of the swage sleeve by 80mm to complete the “soft eye”
  3. Cut blanks to 2930mm = 2850 + (80.0mm)
  4. Use the 3.0mm Oval Aluminium Swage Sleeve to hold the Soft Eye formed to size using the DAM mandrel, allowing 2.0mm of wire to protrude on the backside of the swage sleeve
  5. Using the Bench Swager Crimping jaws (3.0mm) and press the oval swage sleeve to a round Tube
  6. Use the 3.2mm Round Aluminium Swage Sleeve to place an end stop on the other end, allowing 5.0mm of wire to protrude on the backside of the swage sleeve (if the fit is not ‘snug’, you may need to ‘crimp’ the round swage to hold it in place for the next step.
  7. Using the Crimping jaws are from 240 – round shape for 3.0mm Oval Sleeves in the Hydraulic Bench Press and press the round swage sleeve to ~3000PSI