Jaw Swage Rigging Screw Fork Terminal Long Screw Eye LRTT BlackTech

Description

BlackTech Jaw Swage Rigging Screw Fork Terminal Short Screw Eye LRTT Kit suits a run of wire of up to 20 meters (hence the LR or Long Run). The Jaw Swage Rigging Screw provides tensioning. Consequently, this makes both ends adjustable. Ultimately, the eye screws secure both ends of the wire. The long Lag Eye Screw at both ends form the two attachment points. These attach directly into a timber posts (hence the TT or Timber to Timber). Versions of this Kit work with 3.2mm Wire Rope.

Application
We recommend cutting, building, installing (a single wire first) and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

Option 1 – Build in Place First step, secure the eye screws. Secondly, drill the intermediate posts out to at least 4mm prior to swaging in place. Thirdly, install the wire through the intermediate posts and ‘cut to length’. Finally, before swaging, please expand all of the tensioners. As a result, this preserves the maximum adjust-ability.

Option 2 – Pre Build Alternately, you build the wire into the Jaw Swage Rigging Screw Fork Terminal Short Screw Eye LRTT Kit before you install it. Consequently the wire length is the ‘inside to inside’ post measurement less a fixed amount. Interestingly, this fixed amount is the distance ‘taken up’ by the fittings. Finally, the kit installs and adjusts properly with the correct length adjustment.

Contents

• Lag Eye Screw Stainless Steel 316 Marine Grade (2 included)
• Jaw/Swage Rigging Screw G316 Stainless Steel Marine Grade (2 included)

Characteristics

• Balustrade Kit for 1 Runs/Wire
• Post Connections TT (Timber to Timber
• Recommended Run Length <20M (LR)
• Swaging Method: Hydraulic
• Wire Structure: 1×19
• Diameter of Wire: 3.2mm
• Section Orientation: Flat, Stairs, Angle
• Wire Orientation in a Section: Horizontal, Vertical