Jaw Swage Rigging Screw Long Eye Bolt Nutsert LRMM-C
Click Here for Short Run Version of this Kit SRMM-C
Potentially Very Useful Related Items…
Description
Jaw Swage Rigging Screw Long Eye Bolt Nutsert LRMM Kit suits a run of wire of 10 meters or more (hence the LR or Long Run). This version of the kit is our ‘commercial’ version which has additional lock nuts and washers. There are two tensioning points and two attachment points. attachments are two M6 x 1.0 x 40mm (Short) Mini Eye Bolts. These attach directly into the two RHT nutserts once they are installed into the metal posts (hence the MM or Metal to Metal).
Application: Drill the posts and install the nutserts using a Nutsert Tool. The first end of the run has a Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire. This attaches to the first 40mm Eye Bolt. The Mini Eye Bolt fastens to a metal post, plate or nutsert. The second end uses another Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire to attach to the second 40mm Mini Eye Bolt which is fastened to the second metal post, plate or nutsert. . We recommend that the end posts are drilled 9.0mm and M6x1.0 Stainless Steel Rivet Nuts (rivnuts / nutserts) are installed. The lock nuts and washers are used to “Lock” the eye bolts into position. Nutsert tools and fasteners are available on this site.
Contents
- M6 x 40mm Mini Eye Bolt Stainless Steel 316 Marine Grade (2 included)
- Jaw/Swage Rigging Screw G316 Stainless Steel Marine Grade (2 included)
- M6 RHT Nutserts G316 Stainless Steel Marine Grade (2 included)
- M6 Hex Lock Nuts Stainless Steel 316 Marine Grade (2 included)
- 6mm Std Washer Stainless Steel 316 Marine Grade (2 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length >10M (LR)
- Swaging Method: Hydraulic
- Wire Structure: 7×7, 1×19
- Diameter of Wire: 2.4mm, 3.2mm, 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical