Jaw Swage Rigging Screw M5 – 2.4mm G316 Stainless Steel TRADE PACKS

$4.79$4,420.00 Inc GST

Sale!

Jaw Swage Rigging Screw M5 – 2.4mm G316 Stainless Steel TRADE PACKS

$4.79$4,420.00 Inc GST

Clear
SKU: 28471 Category:

Product Description

Jaw Swage Rigging Screw M5 – 2.4mm G316 Stainless Steel is a turnbuckle also known as a Jaw Swage Bottle Screw. They are ideal fasteners for projects requiring tensioners or turnbuckles for stainless steel wire rope.  A Rigging Screw is a closed body turnbuckle.  These fasten with a swaged bolt and a removable pin and pivot. They easily adjust on a secured post or frame. Consequently, they are easily attached to a saddle or lag screw eye and provide a professional and timeless look.

****

Usage: The Jaw Swage Rigging Screw M5 – 2.4mm will work with a range of fittings. They fasten with the removable pin to an anchor hole. An anchor holes form the frame or area that will contain the wire. Generally, the Jaw Swage Rigging Screws work with other hydraulically swaged fittings.  A hydraulic swager crimps the stud to the appropriate diameter of wire rope.  With both right-hand and left-hand threads, the body of the Jaw Swage Rigging Screw M5 – 2.4mm can easily provide tension to your wire rope, without bending or stretching the wire. Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.

* * * *

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with wire rope manufacturing enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

* * * *

Dimensions: D = ~ 6.0mm d = ~ 6.0mm L = ~ xxx.0mm L1 = ~ xxx.0mm A = ~ 8.0MM

Usage Tips

  • Jaw Swage Rigging Screws are ideal fasteners for projects requiring tensioners or turnbuckles for stainless steel wire rope.
  • The removeable pin, and pivot, allow these fasteners easily adjust on a secured post or frame, and can be attached to a saddle or lag screw eye.
  • Turnbuckles use both right-hand and left-hand threads. Firstly, these allow the body of the rigging screw to easily provide tension to your wire rope, without bending or stretching the wire.
  •  Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.
  • The terminal is normally fastened to a saddle or a rigging screw on the posts or uprights that form the frame or area that will contain the wire.
  • The rigging screw requires a hydraulic swager to crimp the fitting to the appropriate diameter of wire rope

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important.
  • It is recommended that similar alloy fasteners are used so that a dis similar (corrosive) alloy reaction is avoided. Generally G304 Stainless Steel screws are used in timber (counter sunk screws in soft woods and pan head screws in hard woods). Generally, G304 Stainless Steel Rivets are used to attach fittings to metal surfaces (aluminium, mild steel, and stainless steel).
  • It may be necessary to (electrically) isolate and insulate fittings from the substrate material - again to avoid a galvanic (dissimilar alloys) reaction. Nylon washers can be very effective in this regard.
  • Additionally, all fittings and tools mentioned: c-spanner and hydraulic swagers are available through our store as well. These Rigging Screws are primarily sized according to the diameter of wire with which they work. Therefore, they are used in concert with other fittings. Consequently with a similar swaging style - these additional fittings work with the same diameter of wire rope.

Additional Relevant FAQs

Specifications

Pack Size

Single, 10 Pack, 100 Pack, 1000 Pack

Thread

M5 RHT

Material

Stainless Steel

Grade

AISI G316 (Marine)

Connection Style

Hydraulic Swaging

Wire Diameter

2.4mm

Attachment Style

Variable

Attachment Substrate

Variable

Tension Style

Turnbuckle – Jaw/Swage Closed

Dimensions

D = ~ 6.0mm
d = ~ 6.0mm
L = ~ xxx.0mm
L1 = ~ xxx.0mm
A = ~ 8.0MM