Jaw Swage Rigging Screws

Jaw Swage Rigging Screws  are ideal fasteners for projects requiring tensioners or turnbuckles for stainless steel wire rope. With a removeable pin, and pivot, these fasteners easily adjust on a secured post or frame, and can be attached to a saddle or lag screw eye, providing a professional and timeless look.

Especially relevant are the both right-hand and left-hand threads. Firstly, these allow the body of the rigging screw to easily provide tension to your wire rope, without bending or stretching the wire. Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.

Additionally, all fittings and tools mentioned: c-spanner and hydraulic swagers are available through our store as well. The Jaw Swage Rigging Screws are primarily sized according to the diameter of wire with which they work. Therefore, they are used in concert with other fittings. Consequently with a similar swaging style – these additional fittings work with the same diameter of wire rope.

Application:

► Turnbuckles work because they have both right-hand and left-hand threads, the body of the rigging screw can easily provide tension to your wire rope, without bending or stretching the wire.
► The jaw is normally fastened to either a saddle secured to the posts or uprights that form the frame or area that will contain the wire or a Lag Screw Eye. Therefore, the lag screws are machined to fit the ‘pin’ side of the Jaw / Swage Rigging Screw.
► The rigging screw requires a hydraulic swager to crimp the fitting to the appropriate diameter of wire rope.

Features and Benefits:

► AISI 316 Marine Grade
► Precision Manufactured
► Factory Wrapped Sealed
► Rustproof
► Quality: Marine AISI
► Grade: 316
► Body: Closed
► Swaging Method: Hydraulic
► Recommended Wire Structure: 1×19 or 7×7

Content:

► Jaw / Swage Stainless Steel Rigging Screws (closed Turnbuckle) for Stainless Steel Wire Rope