Long Bolt Jaw Rigging Screw Hex Adjustor LRMM
This Long Bolt Fork Rigging Screw Hex Adjustor LRMM kit suits a run of wire of up to 20 meters (hence the LR or Long Run). There is a closed turnbuckle. A Bolt Jaw Rigging Screw attach directly through up to 100mm metal posts (hence the MM or Metal to Metal).
Description
Long Bolt Jaw Rigging Screw Hex Adjustor LRMM Kit suits a run of wire of 10 meters or more (hence the LR or Long Run). There are two Long Bolt Jaw Rigging Screws that form two attachment points. Consequently, this makes both ends adjustable. Ultimately, the threaded portion of the Long Bolt Swage Rigging Screw secures both ends of the wire. In this kit, the ends are designed to pass through the attachment posts and be secured with Hex Adjustors. Two attachment points provide maximum adjustability. These attach directly into metal posts (hence the MM or Metal to Metal). Optional versions of this Kit work with 3.2mm and 4.0mm Wire Rope.
Application
We recommend cutting, building, installing (a single wire first) and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.
Option 1 – Build in Place First step, secure the bolt jaw rigging screws with the Hex Adjustors. Secondly, drill the intermediate posts out to at least 4mm prior to swaging in place. Strongly consider using grommets to avoid a dissimilar alloys reaction. Subsequently, install the wire through the intermediate posts and ‘cut to length’. Thirdly, before swaging, please expand all of the tensioners. Finally, this preserves the maximum adjust-ability. Note that a dissimilar alloy reaction can cause corrosion.
Option 2 – Pre Build Alternately, you build the wire into the Long Bolt Jaw Rigging Screw LRMM Kit before you install it. Consequently the wire length is the ‘inside to inside’ post measurement less a fixed amount. Interestingly, this fixed amount is the distance ‘taken up’ by the fittings. Finally, the kit installs and adjusts properly with the correct length adjustment.
Contents
- LONG Bolt (120mm) Jaw Rigging Screw Stainless Steel 316 Marine Grade (2 included)
- Hex Locking Nuts G316 Stainless Steel Marine Grade (2 included)
- Nickel Plated Copper Hourglass Ferrules (2 included)
- Thimbles G316 Stainless Steel Marine Grade (2 included)
- Hex Adjustors G316 Stainless Steel Marine Grade (2 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <20M (LR)
- Swaging Method: Manual
- Wire Structure: 7×7, 7×19
- Diameter of Wire: 3.2mm, 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical