Manual Swaging – Bare Cable
Our Manual Swaging service (also know as pre-swaged wires) has a turn around time of about a week Wire are made to order using a wire structure of your choosing in combination with fittings or balustrade wire kits of you choosing as well.
An emergency express service may be available based on quantities – at an agreed premium price – basically, your lack of planning does NOT constitute my emergency – but we will do our best to help – and if we get stuck into it, it will be very EXXY).
Description
Manual Swaging of Bare (uncoated) cable as a custom service is something that Low Cost Wire is pleased to offer in our factory in Sydney. Our Cut and Swage service (also know as pre-swaged wires) has a turn around time of about a week (1-day express service is available on an agreed basis for a premium price). Wire are made to order using a wire structure of your choosing (7×7 or 7×19, or 1×19) in combination of wire kits or fittings of your choosing as well.
All we need is your measurements from inside post to inside post (for a fitting kit) or from bearing point to bearing point for a rigging cable & we will make the wires to order – and guarantee that they will fit (or we’ll do them over). Basically, all the hard work is done for you.
Features & benefits
- Pre-swaged Wire Kits (with only 1 end swaged) are made to length ready for you to install.
- Wire is cut to length One or both ends may swaged
- Security cables with loops can be constructed to measure