: Safety Wire SHSH-6mm 1M 3.2mm/4.8mm Coated Black 7X19 G316 Stainless Steel ##

Description

Safety Wire SHSH 6.0mm 1000mm 7X19 Black Coated G316 Stainless Steel

Materials: for each wire

• 2 – 3mm hourglass nickel coated copper swages
• 2 – 6mm Spring Hooks with Eyes 316 stainless steel thimbles
• a Blank of 3.2mm 7×19 Black Coated G316 Stainless Steel Wire Rope

Construction:

1. 1. The length of each Soft Eye and Spring Hook extends the length 80mm, and each soft eye uses 90 mm of wire.
   2. Cut blanks to 1020mm = 1000 – (2*80) + (2*90.0mm)
   3. Strip 90mm from both ends of the wire rope section
   4. For each end:
      1. Assemble the Swage Sleeve and the Spring Hook lining up the end of the stripped wire with the edge of the coating and the edge of the sleeve 3mm back from the coating
      2. Use the 3.0mm Hourglass Nickel Coated Copper Swage Sleeve to hold the Soft Eye
      3. Using the Manual BenchSwager, let the springs clamp down on the sleeve in the #3 hole
      4. Check the soft eye, allowing 3mm of wire to protrude on the backside of the swage sleeve
      5. Using the #3 hole in the Manual Bench Swager, progressively press the swage sleeve