1300 601 514
Swage Bolt RHT End Stopper Washer SRMM

$3.98$9.98 Includes GST

Sale!
Rod Terminal RHT Swage Bolt Washer
Rod Terminal RHT Swage Bolt Washer Ass Diag
Swage Rod Terminal or End Stopper G316 Stainless Steel Fitting
Stainless Steel Flat Washer
Male Swaged Terminal Bolt RHT
Rod Terminal RHT Swage Bolt Washer Comp Picture

Swage Bolt RHT End Stopper Washer SRMM

$3.98$9.98 Includes GST

Clear
SKU: 23243 Categories: , , , ,

This Lag Screw RHT End Stopper SRTT  kit includes fittings suitable for a Vertical Run into a top rail – with a bottom rail in place. The set up works as the Lag Screw is one tensioning point. There are enough fittings for a single wire run.

Swage Bolt RHT End Stopper Washer SRMM

This Swage Bolt RHT End Stopper Washer SRMM  kit includes fittings suitable for a Vertical Run into a top rail – with a bottom rail in place. The set up works as the Swage Bolt is one tensioning point. There are enough fittings for a single wire run:

  • 1 – Swaged Bolt G316 Stainless Steel
  • 1 – Swage End Stopper G316 Stainless Steel
  • 1 – Flat Washer G316 Stainless Steel

In this application, the wire is built to length and the Swage Bolt is fed through a hole drilled in the Bottom Rail. The end of the run uses the Swage Bolt to create the required tension, and the other end uses a swage end stopper (sometimes called a dome end, or end stop) to keep the wire from pulling through the bottom rail and the washer to prevent twisting the wire.

The fittings must use hydraulic swaging. They suit a single wire runs of Stainless steel wire rope, provided it measures less than 10 metres. The length of a wire run is measured from the inside of each top and bottom rail.

Installation of the Swage Bolt RHT End Stopper Washer SRMM  kit is simple. Cut the wire to length, swage the dome end, add on the washer, feed the wire through pre-drilled bottom rail, swage the bolt terminal on, and screw into the top rail to apply tension.

Additional Information

Grade

AISI G316 (Marine)

Material

Stainless Steel

Run Length

Under 10M (SR)

Wire Structure

7×7, 1×19

Wire Diameter

2.4mm, 3.2mm, 4.0mm, 4.8mm, 5.0mm, 6.0mm, 6.4mm

Connection Style

Hydraulic Swaging

Attachment Substrate

Metal

Attachment Style

Machine Stud

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)