Swage Bolt RHT LHT Swivel Bolt Timber Insert SRTT

Description

Swage Bolt RHT LHT Swivel Bolt Timber Insert SRTT

Swage Bolt RHT LHT Swivel Bolt Timber Insert SRTT Kit suits a run of wire of 10 meters or less (hence the SR or Short Run) on an angle (ramp or stairs). Fittings include a Right Hand Thread (RHT) & a Left Hand Thread (LHT) Terminal Swage Bolt that form two attachment points in combination with Swivel Bolts (also both RHT and LHT). Together, with the timber inserts, the swivels attach directly into Timber posts (hence the TT or Timber to Timber).

Application

All attachment points must be drilled to receive the minor diameter of the Timber Inserts. The first end of the run has a RHT Swage Bolt swaged to the wire and this attaches to the first timber post or wall using a RHT Swivel Bolt into the RHT Timber Insert. As well, the second end uses an LHT Swage Bolt which is fastened to the second post or wall with the second LHT Swivel Bolt and the LHT Timbe Insert.

Wire may be installed through the intermediate posts and ‘cut to length’. Please make sure you cut the wire beforehand. It is VERY difficult to ‘cut to size’ once the hardware is installed. Drill the intermediate posts out to at least 4mm prior to swaging in place – our grommets require and 8mm hole.

Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement. This length has a fixed amount removed. Because the fixed amount represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly. This number represents the amount we would cut off in the factory to custom build wires with this kit for a given length. We recommend cutting, building, installing and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

Please note that we strongly recommend that installation of these kits requires 2 people.

Contents

• M6 x 1.0 X 40mm RHT Swage Bolt Stainless Steel 316 Marine Grade (1 included)
• M6 x 1.0 X 40mm LHT Swage Bolt Stainless Steel 316 Marine Grade(1 included)
• M6 x 1.0 X 40mm RHT Swivel Bolt Stainless Steel 316 Marine Grade (1 included)
• M6 x 1.0 X 40mm LHT Swivel Bolt Stainless Steel 316 Marine Grade(1 included)
• M6 x 1.0 RHT Timber Insert Stainless Steel 316 Grade(1 included)
• M6 x 1.0 LHT Timber Insert Stainless Steel 316 Grade(1 included)

Characteristics

• Post Connections TT (Timber to Timber)
• Recommended Run Length <10M (SR)
• Swaging Method: Hydraulic
• Wire Structure: 7×7, 1×19
• Diameter of Wire: 3.2mm, 4.0mm
• Thread of Fitting: M6 x 1.0
• Section Orientation: Flat, Stairs, Angle
• Wire Orientation in a Section: Horizontal, Vertical