Wire Rope Grips Double Zinc Steel ALL SIZES

Description

Wire Rope Grips Double Zinc Steel are the fitting that is used to fasten the ends of wire back onto itself. These are ‘swageless’ wire fittings that are also known as bulldog clips or wire clamps. They can be fastened by using a wrench and do not require hydraulic or manual hand swaging. Each size is designed to work with a small range of diameters of wire Rope. These fittings are “Commercial” graded which makes them a Non-Rated fitting and not appropriate for lifting projects.

What is this?

• Double Clamp Wire Rope Grips Galvanised Steel with Electroplated Zinc Coating suiting various diameters of wire rope

What are the dimensions?

• Varies by optional choice

Who is it for?

• Commonly used in non-swaged adjustable connections where maximum strength from minimum hardware is required and best used when using hand swages are not appropriate AND a particular load rating is NOT required.

What is included?

• Double Clamp Wire Rope Grip of various sizes suiting various wire rope diameters.
• Available sizes are 8.0mm, 10mm/12.0mm, and 16.0mm

What are the features?

• Grips are designed to work with High and Medium Flexibility Steel Wire Rope
• Threaded fasteners allows torque load to be measured
• Grips can be re-used or repositioned at will
• Corrosion Resistance is high

What works with this product?

• Stainless Steel wire rope (coated or uncoated) and Galvanised Steel Wire Rope (uncoated or coated) secured with this product.
• Secure deployment can be achieved with the measured torque settings and thread locking compound at the time of installation

What to avoid with this product?

• Use with stainless steel may cause corrosion and or “Tea Staining” in aggressive environments.
• Over tensioning must be avoided when tightening to prevent stripping the nuts or shearing the thread.
• Highly Acidic or Alkaline environments can lead to degradation of the electroplated zinc galvanised finish

Choose Quality for Excellent Results...Read More

All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

How to plan regular cleaning & Maintenance for increased product durability... Read More

To ensure the longevity of your product, a planned regular cleaning and maintenance approach is highly recommended. Whether the product is wire, fittings, or even tools -the frequency of cleaning, maintenance and inspection will vary depending on many factors such as environment, usage levels, required performance, and any inherent risk or safety factors. All of these things are worthy of consideration when planning predictive and/or preventative maintenance...

Given the vast proportion of Australia's population resides near a shoreline - the effect of a marine environment is often the most significant factor in product longevity

The table below proposes a cleaning schedule based only on "environment". It is intended as a guide and should be varied as required. We recommend using non-aggressive cleaning agents and fresh water for routine maintenance.

Environment	Agression Level	Distance from Coast	Cleaning Schedule
Indoors environment	Very Low	N/A	Every 18 - 48 Months
Clean inland environment	Low	20km +	Every 10 - 12 Months
Moderate urban or coastal environment	Medium	1-5km	Every 4 - 6 Months
Harsh urban or coastal environment	High	< 500m	Every 2 - 3 Months
Severe coastal/ marine environment	Extreme	< 500m	Every 1 - 2 Weeks