Hook Eye Turnbuckle Thimble Grip Collared Screw Eye LRTT
Hook Eye Turnbuckle Thimble Grip Short Screw Eye LRTT kit suits a Heavy Duty suspension, guy or catenary wire, 40 meters or less in length (hence LR Long Run).
Potentially Very Useful Related Items…
Description
Hook Eye Turnbuckle Thimble Grip Short Screw Eye LRTT kit suits a Heavy Duty suspension, guy or catenary wire, 40 meters or less in length (hence LR Long Run). There are dual tensioning points and two attachment points. attachments are two Collared Lag Eye Screws. These attach directly into softwood or hardwood timber posts (hence the TT or Timber to Timber).
Application: Both ends of the wire attach to a Hook Open Turnbuckle (for wire tensioning). The eye of the turnbuckle is connected to the wire with three wire rope grips and a thimble. The hook on each end attaches to the Collared Lag Screw Eye. Both Screw Eyes fasten to a timber post or wall.Wire may be installed and ‘cut to length’ or left longer for adjustment later. Please make sure you expand the turnbuckles before measurement. Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly.
Contents
- Collared Lag Eye Screw Stainless Steel 316 Marine Grade (2 included)
- Hook Eye Open Turnbuckle G316 Stainless Steel (2 included)
- Wire Rope Grips G316 Stainless Steel (6 included)
- Thimbles G316 Stainless Steel (2 included)
Characteristics
- Suspension, guy or catenary Hardware Kit for 1 Runs/Wire
- Post Connections TT (Timber to Timber)
- Recommended Run Length <40M (AXLR)
- Swaging Method: Swageless
- Wire Structure: 7×7 (recommended), 7×19
- Diameter of Wire: 3.2mm, 4.0mm, 4.8mm
- Wire Orientation in a Section: Horizontal, Vertical, Angled