BlackTech Eye Screw 6mm x 75mm G316 Stainless Steel TRADE PACKS

Description

Eye Screw 6mm x 75mm G316 Stainless Steel (or Lag Screw Eyes) have a MUCH smaller head and are more streamlined and this one is BLACK. They match our Mini Eye Bolts for a sophisticated architectural look. Mini refers to the size of the head/eye of the screw. Eye Screw 60mm x 75mm are formed to work with either a manually or a hydraulically swaged terminal end. Terminal ends can be either loops or pinned fittings. Secondly, Longer Lag Eye Screws work best in situations where you need to go into concrete or go through render or siding to hit an anchoring stud. You may need the extra length/bite for use with a standard Plastic Plug.

Usage: Eye Screw 6mm x 75mm fasten into the posts or uprights directly. They also serve as the fastening points that anchor a run of balustrading wire into a post. To make the job easier, try our ‘6mm Lag Eye Screw Driver’ Simply put, IT ROCKS – saves your wrists and speeds up the install. It also demonstrates a bit of ingenuity. Choose a shorter Lag Eye Screw for attachment into either pine or hardwood. There is more than enough bite and you avoid the possibility of torqueing off a longer screw into hard timber. Choosing a longer length is only appropriate in special circumstances.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: D = ~ 5.9mm D2 = ~ 6.5mm L = ~ 43mm L1 = ~ 61mm L2 = ~ 75mm OD is 11.8mm