Jaw Swage Rigging Screw Fork Terminal Long Eye Bolt Nutsert SRMM-C
Click Here for Long Run Version of this Kit LRMM
Potentially Very Useful Related Items…
Description
Jaw Swage Rigging Screw Fork Terminal Long Eye Bolt Nutsert SRMM-C kit suits a run of wire of 10 meters or less (hence the SR or Short Run) because there is a single tensioning pointy. This version of the kit is our ‘commercial’ version which has additional lock nuts and washers. The single tensioning point uses two attachment points which are two M6 x 1.0 x 40mm (Long) Mini Eye Bolts. These attach directly into the two RHT nutserts once they are installed into the metal posts (hence the MM or Metal to Metal).
Application: Drill the posts and install the nutserts using a Nutsert Tool. The first end of the run has a Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire. Attach the tensioner to the first 40mm Eye Bolt. The Mini Eye Bolt fastens to a metal post or plate. Attach the second end using a Fork Terminal swaged to the wire to attach to the second 40mm Mini Eye Bolt which is fastened to the second post or wall. We recommend that the end posts are drilled 9.0mm and M6x1.0 Stainless Steel Rivet Nuts (rivnuts / nutserts) are installed. The lock nuts and washers are used to “Lock” the eye bolts into position. Nutsert tools and fasteners are available on this site.
Contents
- M6 x 40mm Mini Eye Bolt Stainless Steel 316 Marine Grade (2 included)
- Jaw/Swage Rigging Screw G316 Stainless Steel Marine Grade (1 included)
- Fork Terminal (1 included)
- M6 RHT Nutserts (2 included)
- M6 Hex Lock Nuts Stainless Steel 316 Marine Grade (2 included)
- 6mm Std Washer Stainless Steel 316 Marine Grade (2 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Hydraulic
- Wire Structure: 7×7, 1×19
- Diameter of Wire: Selectable (2.4mm, 3.0mm, 3.2mm, 4.0mm)
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal