Lag Screw 8mm RHT 4.0m G316 Stainless Steel TRADE PACKS

Description

Lag Screw 8mm RHT (or Swaged Lag Screw) are fastening points that anchor a run of wire into a post. Conveniently, the Lag Screw 6mm RHT attaches into either pine or hardwood. There is more than enough bite. And you avoid the possibility of torquing off a into hard timber by using a pilot hole. Choosing a longer length of is only appropriate if you must penetrate a covering on your attachment post. The fitting suits angles as does the larger Mini Eye Screws. The Lag Swage Screw suits only hydraulically swaged installations.

Usage: This fitting swages hydraulically to the wire rope. The fitting then attaches to the timber posts or uprights that form the frame or area that will contain the wire. The Lag Screw RHT G316 Stainless Steel terminals suit a single diameter of wire. Applications include other fittings – normally with a similar swaging style – that work with the same diameter of wire rope. They are used extensively in our Slimline SR (Short Run) Balustrade Kits. Often they are paired with either the opposite threaded Lag Screw or some sort of closed turnbuckle, or even a swage stud if linking Timber to Metal posts when used in Balustrade Kits.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: D = ~ 8.0mm L = ~ 93.6mm L1 = ~ 42.0mm L2 = ~ 38.0mm