Jaw Swage Rigging Screw Saddle Screw LRTT
Click for the Short Run version of this Kit SRTT
Potentially Very Useful Related Items…
Description
Jaw Swage Rigging Screw Saddles Screws LRTTKit suits a run of wire of 10 meters or more(hence the LR or Long Run) hence there are two Jaw Swage Rigging Screws to provide dual tensioning points (and further adjust-ability). There are two Saddles secured by self tapping countersunk wood screws that form two attachment points. These attach directly into softwood or hardwood timber posts (hence the TT or Timber to Timber).
Application: The both ends of the run have Jaw Swage Rigging Screws swaged to the wire. The attachment points are saddles which are secured to timber posts or walls using counter sunk self tapping screws. The Jaw Swage Rigging Screws are simply attached to the saddles.
Wire may be installed through the intermediate posts and ‘cut to length’. Drill the intermediate posts out to at least 4mm prior to swaging in place. Before swaging, please expand both of the tensioners so that the maximum adjust-ability is available.
Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly. The fixed amount can be calculated for this kit. This number represents the amount we would cut off in the factory to custom build wires with this kit for a given length. We recommend cutting, building, installing and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.
Contents
- Jaw Swage Rigging Screw Stainless Steel 316 Marine Grade (2 included)
- Saddles (eye straps) Stainless Steel 316 Marine Grade (2 included)
- Counter Sunk Self Tapping Stainless Steel Marine Grade (4 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections TT (Timber to Timber
- Recommended Run Length >=10M (LR)
- Swaging Method: Hydraulic
- Wire Structure: 7×7, 1×19
- Diameter of Wire: 2.4mm, 3.2mm or 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical