1300 601 514
1.2mm 7×7 G316 Stainless Steel Wire Rope

$0.46$105.77 Inc GST

7X7 G316 Stainless Steel Wire Plastic Reel structure
7X7 G316 Stainless Steel Wire Detail
7X7 G316 Stainless Steel Wire Profil
7x7 G316 Stainless Steel Wire Rope Coil with Structure
7X7 G316 Stainless Steel Wire Structure

1.2mm 7×7 G316 Stainless Steel Wire Rope

$0.46$105.77 Inc GST

SKU: 1257 Categories: , ,

1.2mm 7×7 G316 Stainless Steel Wire Rope is primarily used in fishing, hanging/display, shop fitting, and industrial design. It is also used in light rigging construction and is super easy to use wire for the DIY guy  – used by both Professionals and DIY’s. Tensile Strength (MBS) = ~86.7 kg


Application: 1.2mm 7×7 G316 Stainless Steel Wire Rope is considered a flexible wire making it easy to work with and bend with virtually no stretch coefficient. Its ease of use makes it excellent for use with Thimble and Ferrule fittings (but its TOO small for hydraulically swaged fittings). Other uses Include: Picture (statue?) Hanging, Shop Fitting, Shade Sails, Trellis structuring, ‘Green Wall’ construction, Rigging Slings, Theatre Production Infrastructure – Stage Lights, Curtains, & Prop Construction


Length of Wire: Please use the combinations of the offered lengths to get the total length for which you search. E.G. – choose a quantity of “8” of the 10M length to select a single length of 80 Metres. All quantities of Wire Rope are cut and shipped as a single length unless otherwise discussed as a special order. Depending on total length, wire is packaged as a coil or a reel – both are factory wrapped and sealed. A requirement of less than 100M on a reel needs a special order (please phone first).


Quality: All Low Cost Wire products meet our strict ISO Quality Standards and are AISI Mill Certified at manufacture. An AISI Mill certificate of alloy composition (copy) is available on request for a small additional fee (only at the time of purchase). Long experience with wire and rope manufacturing enables the design and manufacture of wire rope with optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. The added bonus is that they provide a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Usage Tips

  • First of all, this wire must be mechanically fastened.
  • Cutting of the wire is best done using Parrot Beak cutters (collapsing trapezoidal design) rather than shears or a grinder.
  • Terminal Loops are formed with Mechanical fastening or manual swaging. In addition, terminal loops must use stainless steel thimbles (eyelets) to retain the strength of the wire by distributing the load along the entire length of wire in the terminal loop. Recommended for all structures with this diameter.
  • Manual swaging is done using Ferrules (or crimps or hand swages) rather than Wire Rope Grips. Nickel Coated Copper is used instead of Aluminum because matching alloys is important. As a result, catastrophic swaging failure will not occur. Aluminium swages WILL cause a dissimilar alloys reaction and as a result corrode the Stainless Steel wire. Low Cost Wire strongly recommends an All-in-1 swaging tool. Recommended for all structures

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important. Standard fittings for G316 Stainless Steel Wire are made from either Nickel Coated Copper or Stainless Steel. Contact with Aluminium or Carbon Steel is NOT recommended as it will cause a corrosive (galvanic) reaction.
  • It is recommended that similar alloy fasteners are used so that a dissimilar (corrosive) alloy reaction is avoided. Generally G304 Stainless Steel screws are used in timber (counter sunk screws in soft woods and pan head screws in hard woods). Generally, G304 Stainless Steel Rivets are used to attach Eye Strap Saddle fittings to metal surfaces (aluminium, mild steel, and stainless steel).
  • It may be necessary to (electrically) isolate and insulate fittings from any non stainless steel substrate material - again to avoid a galvanic (dissimilar alloys) reaction. This can be done using an insulation device such as nylon washers or grommets
  • Lengths of wire less than 100M are cut and labelled as a coil. Lengths of 150M and above are (generally) delivered on a reel however, small lengths can be put on a drum for a small additional cost (please refer to our Reeling Service

Relevant FAQs


Dimensions N/A

1M, 10M, 50M, 100M, 150M, 200M, 305M

Wire Structure


Wire Diameter



Stainless Steel


AISI G316 (Marine)







Connection Style

Manual Swaging


RHOL (Right Hand Ordinary Lay)

MBS (Tensile Strength)

86.7 kg

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)