1300 601 514
Swage Sleeve – 3.0mm Round Copper

$0.69$416.98 Inc GST

Swage Sleeve Round Copper
Copper Cable End Stop Stopper Dimension Diagram

Swage Sleeve – 3.0mm Round Copper

$0.69$416.98 Inc GST

SKU: 28599 Categories: , , ,

Swage Sleeve – 3.0mm Round Copper is a fitting to terminate Stainless Steel Wire Rope. Crimps, clamps, ferrules, or stoppers are additional names for Round Swage Sleeves.  The Swage Sleeve – 3.0mm Round Copper is round in shape.  Additionally, round Swages are “stoppers”.  They are used as duplex Swages for small diameter wire.  Additionally, a Swage Sleeve fits a limited wire diameter.  Other fittings – normally of a thimble – are used in concert with Swage Sleeves.   Swage Stoppers do NOT require thimbles for their use.

* * * *

Usage: The Swage Sleeve – 3.0mm fastens on the end of a wire. Swage sleeve stoppers secure wire ends used with winch and  lifting or control cables. The bare copper is compatible with G316 Stainless Steel Wire Rope.  Bare copper has increased malleability for easy swaging. To clarify, swaging is the process of uniformly crushing a fitting from a starting diameter to a finished diameter. Therefore, the chosen swaging tool must achieve acceptable compression. Logically, the requisite pressure and tool size varies with the size of the wire and the fitting. Consequently, we recommend Swaging Stainless Steel fittings onto wire larger than 3.0mm with an adequate hydraulic swaging tool.

* * * *

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. As well, they are all made with AISI Marine Grade stainless steel. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with design and manufacturing enables the specification and production of aesthetically beautiful and functional products. Finally, our products have a special electro polished treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

* * * *

Dimensions: a = ~ xx.0mm b = ~ xx.0mm s = ~ xx.0mm L = ~ xx.0mm

Usage Tips

  • Used as a stopper, the end of a length of wire is threaded through the swage and a length of wire (at least equal to the diameter of the wire being swaged...) is left protruding.
  • Used as a swage to create a loop, the end of a length of wire is threaded through one side of a swage, the wire is then looped around a thimble and the end of the wire is threaded back through the swage and a length of wire (at least equal to the diameter of the wire being swaged...) is left protruding.
  • Swages to create loops are normally used in concert with Thimbles (the tear drop shaped thin strips of metal that go inside of the Terminating Loop) so that when it is secured, the force of the bearing point is evenly distributed along the length of the thimble and minimizes wear and stretch on the wire cable.
  • The swage or stopper is then secured using a swaging / crimping tool.
  • The swage and thimble form a 'loop' that is normally fastened to the saddle, eye screw/bolt or a shackle already secured to the posts or uprights that form the frame or area that will contain the wire.
  • A stopper is used to prevent the wire being pulled back through a hole.

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important.
  • It is recommended that similar alloy fasteners are used so that a dis similar (corrosive) alloy reaction is avoided.
  • G304 Stainless Steel is used to attach fittings to all grades of stainless steel wire rope. G304 is appropriate in HIGHLY corrosive environments,
  • Copper or Nickel Coated Copper is used to attach fittings to all grades of stainless steel wire rope. It may also be used as a premium fastener on all grades of Galvanised Wire as well. Bare or coated copper is appropriate in all normal  environments - including marine.
  • Aluminium is used to attach fittings to all grades of galvanised steel wire rope. It should not be used as an 'economy'  fastener on any grade of Stainless Wire as corrosion will result and the connection will fail in a relatively short time.
  • It may be necessary to (electrically) isolate and insulate fittings from the substrate material - again to avoid a galvanic (dissimilar alloys) reaction. Nylon washers can be very effective in this regard

Additional Relevant FAQs


Pack Size

Single, 10 Pack, 100 Pack, 1000 Pack





Wire Diameter

2.4mm, 3.0mm, 3.2mm

Connection Style

Manual Swaging


A = ~xx.0mm
D = ~xx.0mm
H = ~xx.0mm
L = ~xx.0mm
W = ~xx.0mm

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)