Swage Sleeve 3.5mm Oval G316 Stainless Steel TRADE PACKS
Swage Sleeve 3.5mm Oval G316 Stainless Steel connects 3.5mm Stainless Steel Wire Rope. A Swage Sleeve may be called a crimp, clamp, ferrule, or tube. The Swage Sleeve 3.5mm Oval G316 Stainless Steel is oval in shape and made from Seamless Stainless Steel Tube. AISI 316 grade makes this a very special fitting appropriate for food grade work. Additionally, Oval Swages are “machine swages”. Duplex Swages are “manual swages”. Machine Swages require hydraulic swaging in diameters of 2.0mm or greater. Additionally, a Swage Sleeve fits a single wire diameter. Other fittings – normally of a thimble – are used in concert with Swage Sleeves. Swage Stoppers do NOT require thimbles for their use.
Description
Swage Sleeve 3.5mm Oval G316 Stainless Steel connects 3.5mm Stainless Steel Wire Rope. A Swage Sleeve may be called a crimp, clamp, ferrule, or tube. The Swage Sleeve 3.5mm Oval G316 Stainless Steel is oval in shape and made from Seamless Stainless Steel Tube. AISI 316 grade makes this a very special fitting appropriate for food grade work. Additionally, Oval Swages are “machine swages”. Duplex Swages are “manual swages”. Machine Swages require hydraulic swaging in diameters of 2.0mm or greater. Additionally, a Swage Sleeve fits a single wire diameter. Other fittings – normally of a thimble – are used in concert with Swage Sleeves. Swage Stoppers do NOT require thimbles for their use.
Usage: The Oval Swage Sleeve 3.5mm anchors together 2 strands of wire. The alloy AISI G316 is more ‘brittle’ than AISI G304 and therefore must be annealed to achieve malleability for easy swaging. To clarify, swaging is the process of uniformly crushing a fitting from a starting diameter to a finished diameter. Therefore, the chosen swaging tool must achieve a cold pressure weld. Logically, the requisite pressure and tool size varies with the size of the wire and the fitting. Consequently, we recommend Swaging Stainless Steel fittings onto wire larger than 2.0mm with an adequate hydraulic swaging tool.
Choose Quality for Excellent Results...Read More
All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for agesโฆHow to plan regular cleaning & Maintenance for increased product durability... Read More
To ensure the longevity of your product, a planned regular cleaning and maintenance approach is highly recommended. Whether the product is wire, fittings, or even tools -the frequency of cleaning, maintenance and inspection will vary depending on many factors such as environment, usage levels, required performance, and any inherent risk or safety factors. All of these things are worthy of consideration when planning predictive and/or preventative maintenance...Given the vast proportion of Australia's population resides near a shoreline - the effect of a marine environment is often the most significant factor in product longevity
The table below proposes a cleaning schedule based only on "environment". It is intended as a guide and should be varied as required. We recommend using non-aggressive cleaning agents and fresh water for routine maintenance.
| Environment | Agression Level | Distance from Coast | Cleaning Schedule |
|---|---|---|---|
| Indoors environment | Very Low | N/A | Every 18 - 48 Months |
| Clean inland environment | Low | 20km + | Every 10 - 12 Months |
| Moderate urban or coastal environment | Medium | 1-5km | Every 4 - 6 Months |
| Harsh urban or coastal environment | High | < 500m | Every 2 - 3 Months |
| Severe coastal/ marine environment | Extreme | < 500m | Every 1 - 2 Weeks |
Explore the distinct and useful characteristics of oval Mechanical Splicing Sleeves...Read More
Oval Swage Sleeves are described as โduplex machineโ swages used to join two wires as a splice or a loop and suit a hydraulic swaging tool ...Read More
|
Home Grown
Australian Family Business |
Exceptional Value
Price Match Promise |
Australian Inventory
Daily Tracked Shipping |
Customer Support
+61 2 9979 5812 |
|---|
Additional information
| Pack Size | ** TRADE PACKS, 10 Pack, 100 Pack, 1000 Pack |
|---|---|
| Material | Stainless Steel |
| Diameter | 3.2mm, 3.5mm |
| Style | Ferrule – Oval |
| Coating | None |
| Color | Bright |
| Grade | 316 / A4 |
| Connection Style | Hydraulic Swaging |
| Dimensions | a = ~ 3.7mm |
| Brand | Low Cost Wire |
Only logged in customers who have purchased this product may leave a review.








Reviews
There are no reviews yet.