1.0mm 7×7 HS10FS Tool Wire Swages Thimbles Wire Use Kit

Description

1.0mm 7×7 – LD Forged Tool, Wire, Swages, Thimbles – Wire Use Kit groups tools and fittings required for 1.0mm Stainless Steel Wire. This kit provides the basics components. Basically you need:

• Wire (of some length) which sort of depends on the project.
• Ferrules (also called crimps or swages). These fasten either the wire to itself (and form a loop) or complete a splicing operation (at least 2 are recommended for security),
• Thimbles (also called eyelets) as these are the reinforcing strip of stainless steel metal that goes inside of a terminal loop formed by swaging a ferrule
• Cutter which simply cuts the wire, and a
• Swager (or swaging or crimping or welding tool) These are available in either a hydraulic form or a mechanical form

Usage: Using the 1.0mm 7×7 – LD Forged Tool, Wire, Swages, Thimbles – Wire Use Kit is easy. Simply cut the wire to length, slip one end into a ferrule, make a loop and slip the end back into the ferrule. We recommend using a thimble inside the loop. A thimble distributes the load on the loop. Additionally, limits the radius through which the wire is pulled – thereby maintaining the MBS and load characteristics of the wire.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with wire rope manufacturing enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Wire Use Kits are also available for different sizes of Wire Rope.